| Type | Bi-amp 2-way constant curvature Enclosure |
| Frequency Response(Preset) | 40Hz-20kHz |
| Amplifier Recommend | VDA18 / VDA14 / C18 / C15 |
| Enclosure Angle | 15° |
| Horizontal | 100° |
| Drivers | LF：1×15" 100mm Voice Coil Neodymium |
| HF：1×3" 75mm Voice Coil Neodymium | |
| Handling Power (RMS) | LF：600W |
| HF：110W | |
| Maximum Peak SPL | 143dB/1m |
| Nominal Impedance | LF：8Ω / HF：16Ω |
| Connectors | 2 x NL4 SpeakOn |
| Pin Connectors | IN = LF:+1-1 / HF:+2-2 |
| LINK = LF:+1-1 / HF:+2-2 | |
| Height Front | 450mm |
| Height Back | 321mm |
| Width | 750mm |
| Depth | 490mm |
| Weight | 32kg / 70.5lbs |
| Rigging and Handling | |
| Handle | 2 ergonomic handles |
| Rigging System | Flush-fitting two-point |
| Threaded | 13x M10 threaded insert |
| Physical Data | |
| Material | Baltic Birch Plywood |
| Finish | Dark Grey |
| Front | Polyester powder-coated steel grill |
| Rigging | Steel |
| Protection rating | IP55 |
 |
T15i-Horizontal Bump | Suitable for T15Fi/T15Wi enclosures |
 |
T15i-Vertical Bump | Suitable for T15Fi/T15Wi enclosures |
 |
T15i-Link | Suitable for T15Fi/T15Wi enclosures |
 |
Eyebolt | M10*30 lifting ring, used for connecting with buckle ring |
 |
T15Fi-Rigging Part | Suitable for rigging and connecting with T15Fi/T15Wi enclosures Adjustable from 7.5° / 15° |
 |
T15Wi-Rigging Part | Suitable for rigging and connecting with T15Fi/T15Wi enclosures not Adjustable from 30° |
 |
U-shaped shackle | 2t 1/2 U-shaped shackles connect to Bump-Bar |
 |
4-Pin 4*4㎡ NL4 Speaker Cables | 1、4Pin-NL4-0.5（0.5meter） 3、4Pin-NL4-10（10meter） 3、4Pin-NL4-15（15meter） 4、4Pin-NL4-25（25meter） |
